:	Apr 28, 2004

.

Make the SRS system safe.

.

Remove the B-pillar lower trim panel.

.

Release the safety belt lower anchor from the seat.   Remove the bolt cover.   Passenger side, disconnect the electrical connector.   Remove the Torx bolt.

.

:   Make sure the seat belt height adjuster is at its lowest point prior to removal of the B-pillar upper trim panel. Remove the B-pillar upper trim panel.   Release the front and rear door weatherstrips for access.   Release the 2 lower clips, then the remaining upper clip.   Release the safety belt.

.

Install the B-pillar upper trim panel.   Secure with the clips.   Attach the safety belt.   Attach the door weatherstrips.

.

Attach the safety belt lower anchor to the seat.   Tighten the Torx bolt to 40 Nm (30 lb.ft).   Passenger side, connect the electrical connector.   Install the bolt cover.

.

Install the B-pillar lower trim panel.